Pressure Washing

Garage Door springs are also as much important as other parts of the door and they eventually are worn out after a few years and need to be replaced periodically. Whenever you observe any defective sign like sagging springs, gaps between coils or breakage between sections of springs it’s time to replace them by contacting Renew Exteriors LLC pressure washing service. If you want to replace the old spring, first, you should figure out what type of springs you are having on your Door.

There are different types of garage springs available but most of the garage owner likes to use torsion springs or extension springs. When it comes to the torsion springs, they are commonly used for the newer garage door installation and usually designed above the middle side of your garage. If you don’t have any idea about what types of garage door you have, simply close the garage door and observe the center area of your door.

If you experience a louder voice from your garage then it can be torsion spring because these springs are very tightly wound, hold a lot of tension, and make a loud noise if they snap. In case of extension spring, they can be found running parallel to the garage door track on either side of your garage door.

You can easily recognize them while closing your garage door – they would be suspended a few inches above the garage door tracks, running nearly the length of the track. If your garage door is working smoothly while opening and closing the door then they are well functioning, and you don’t have to replace them for a longer period. But if you face any difficulty then it means you are having out of balance spring. Call a professional to fix them immediately.